Best Creation, Inc. is dedicated to providing our customers with the highest quality craft products. The new Matte Iron – On Vinyl is sure to be the cherry on top to any of your HTV projects. Instructions for use with an Iron or Heat Press can be found inside the paper wrap-around label. There are also suggestions for Multi-cut/Blade Depth settings for some popular cutting machines. Transfer Temperature: 266 to 320℉ Transfer time: 12-15 seconds Warm Peel Our new “Heat Transfer Vinyl” heat transfer adheres to many fabrics, such as cotton, polyester. Also adheres to other surfaces, such as ceramic mugs, paper, and picture frames. They cut great with any electric or hand die-cutting machines. Safe to hand wash (inside out, cold water), and hang dry. Material application: Cotton, polyester, Application Instructions: 1. Remove the extra Metallic Iron, which is called weeding, leaving only your desired images. 2. Set your Iron on on high, no steam. 3. Preheat your material for 5 seconds before ironing. 4. Place your images on material with plastic facing up. Make sure you place a separate piece of material or protective cover sheet before ironing. 5. Apply firm pressure with iron for 15 seconds. 6. Remove plastic. Peel Cold. Place the separate material or protective cover over image and iron on for an additional 5 seconds. Care Instructions: 1. For the best results wait 24 hours before washing. Hand wash inside out with cold water. Hang dry. Do not tumble dry. Tips: 1. Make sure to flip images prior to cutting so they appear mirror-image 2. If a portion does not adhere, go over it 10 additional seconds with iron or hear press with firm pressure. 3. Use a flat surface, ironing board, or heat press.