DISCLAIMER: Color swatches are for reference only. Shades may vary due to the color and resolution of your computer screen and color printer output. We are not responsible/ liable for color matches made with online color swatches.
Ecotex Discharge Inks are bright, vivid and produce an extremely soft hand. WB Discharge Ink can be printed on high mesh counts and produces very fine image detail. Our ink can be used with other inks to create multiple effects.
Emulsion Recommendations: We recommend using a water-resistant emulsion such as WR-Blue or DC-Pink
Water based printing: Our ink can be used straight out of the bottle as a traditional water-based ink. We recommend only doing this technique on light color garments.
Discharge Printing: This ink can also be used a discharge ink by adding the discharge powder. When using as a discharge ink, add enough discharge powder to the amount of ink you need for the print run. This will be somewhere in between 3-5% by weight. Mix thoroughly. Once the powder is added to the ink it will last for one hour.
Flash and Curing Guidelines: Cure for 90 seconds at 320 F. Best results 2-3 minutes at 300-320 F
General Testing: We recommend doing a stretch and a wash test to ensure you cured and printed correctly before going into production. Increase cure time if testing fails. Best results will be seen on 100% cotton. Synthetic fibers will not discharge properly.