MILAPEAK 3:1 Dual Wall Adhesive lined Heat Shrink Tubing kit
– Best for solder joint protection, group of lines marking, resistance electric capacity reason protection etc.
– High Quality
– Long service life
– High Strength Toughness
– Corrosion resistance
– Good electrical insulation
– High temperature resistance
How to use it?
1. At First choose the right size tubes, as it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original diameter, please measure diameter of wire which is equal to the size of tube after shrinked.
2. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hair dryer, heat guns heating for large one until the wire was wrapped tightly.
3. Don’t touch the tube until it becomes cool.
– Color: Black & Red
– Material: Polyolefin
– Heat shrink ratio: 3:1
– Operating Temperature:-55°C to + 125°C
– Minimum Shrinkage Temp: 70°C
– Full Shrinkage Temp: 110°C maximum
– Tensile strength: 10.4Mpa
– Dielectric strength: 15 kV / mm
– Flammability: Flame Retardant
– 1x 270Pcs(5 Sizes) Dual-Wall 3:1 Adhesive Lined Heat Shrink Tubing
* 70pcs 1.77″ lengths ?3/32″(Black 35pcs,Red 35pcs)
* 80pcs 1.77″ lengths ?3/32″(Black 40pcs,Red 40pcs)
* 80pcs 1.77″ lengths ?1/8″(Black 40pcs,Red 40pcs)
* 20pcs 3.5″ lengths ?3/16″(Black 10pcs,Red 10pcs)
* 12pcs 3.5″ lengths ?1/4″(Black 6pcs,Red 6pcs)
* 8pcs 3.5″ lengths ?3/8″(Black 4pcs,Red 4pcs)
– 1x Plastic Box
If you have any query, please freely contact us and we will be happy to serve you.